FAST SHIPMENT Mastech MS5203 Digital Megger Insulation Tester Resistance Meter Tecrep 10G 1000V AC/DC Voltage Electrical Test

FAST SHIPMENT Mastech MS5203 Digital Megger Insulation Tester Resistance Meter Tecrep 10G 1000V AC/DC Voltage Electrical Test
  • Продавец
  • Список ценUS $93.90piece
  • Продажная ценаUS $93.90piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,2 (713)

Oписание продукта

MASTECH Electrician Kit MS5902 MS8233B MS2008A MS6906 + tool sets + Portable bag
The Mastech MS8233B is a manual 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check & continuity test. It has a back-lit LCD display with a maximum reading of 1,999. It has a built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.
No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use.
·         DCV: 200m/2V/20V/200V±0.5%, 600V±0.8%
·         ACV: 200V±1.2%, 600V±1.2%
·         DCA: 200μA±1.0%, 2mA±1.0%, 20mA±1.0%, 200mA±1.5%, 10A±3.0%
·         R: 200/2k/20k/200k±0.8%, 2MΩ±1.0%
·         Diode test
·         Continuity test
·         Non-contact AC Voltage detection (> 90V/AC, LED flash warning)
·         Sampling rate: 3 times per second
·         Dimensions: 5 1/2" × 2 1/2" × 1 1/4"
·         Weight: 5 Oz
·         Power: 9V battery ( not included)
3 1/2 digital Back-lit LCD display with a maximum reading 1,999
Non-contact AC voltage detector ( > 90 V/AC)
In conformance with international safety standards IEC1010-1 CAT III 600V
Data Hold
All range protection
Over range indication & batter indication
Polarity indication Tilt back stand
·         Test leads
• Conform to the IEC1010-1 standard CAT III 600V 
• The over-molding rubber case protects the meter to be stronger 
• SMT application 
• Display: 1999 counts 
• Auto/Manual range 
• Maximum value hold 
• Data hold 
• Auto power off 
• DCV: 200m/2/20/200/600V±0.7% 
• ACV: 200m/2/20/200/600V±0.8% 
• AC current: 2A/20A/200A/600A±2.0% 
• Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ±1.2% 
• MAX. diameter for conductor: 26mm 
• Back light 
• Clamp lighting 
• Diode test 
• Continuity test 
• Power: AAA (1.5V) x 3  battery ( not included)
• Size: 208mm x 78mm x 35mm 
• Weight: Approx. 240g(w/o battery)   
MS5902 disconnect switch detector PREFIX = O
Security Level IEC1010-1CATII 600V
Operating voltage AC110/220V
Breaker convenient search function to quickly find and target branch circuit breakers loop(With MS5902T use)
Automatically adjust the sensitivity
Visual and audible indication
Test function tripod socket socket connection status LED display correct open ground
Ground and FireWire reverse
Zeroline and FireWire reverse
Automatically and quickly finds correct breaker or fuse.
Quickly and easy identifies conditions of circuit socket.
MS5902-T× Works on 220V AC, MS5902-TB Works on 110V AC
Operating temperature: 0 ~ 50
The task of Circuit Breaker Finder/Socket Tester (MS5902)is finds correct breaker or fuse and test socket.You will have annoyance no more for locating the correct circuit breaker supplying power to an AC outlet or lighting fixture.
Please caution extremely when use the MS5902 in the gigantic circuit breaker ark. Don\'t use when voltage more than 120V/230V AC.You can turn on the flashlight in the dark surroundings.
  Automatically and quickly finds correct breaker or fuse.
 Quickly and easy identifies conditions of circuit socket.
 MS5902-T× Works on 220V AC, MS5902-TB Works on 110V AC
  Operating temperature: 0 ~ 50c
Operation:  Locating a Circuit Breaker or Fuse
  Keep the pillar at left on the MS5902-T
   Plug the MS5902-T into the receptacle.if there is a candescent light
    fixture,please install a socket adapter before make sure the switch is
    OFF.then plug the MS5902-T into the socket adapter,turn the switch on at
    one time.(Socket adapter need purchase additional)
  Go to the circuit breaker panel box.
  Turn the MS5902-R on,the red LED is light.
  Place the chapiter of the MS5902-R directly onto the circuit breaker or fuse.
 Slide the chapiter of the MS5902-R down each breaker along both sides of 
    the panel .Then the MS5902-R will beep frequently as it denote the
    relative signal strength.
 Move the MS5902-R down each breaker once more. On the third pass,
    the MS5902-R will beep ,the red LED will quench and the green LED will 
    light only at the circuit Breaker powering the MS5902-T. 
  Push the breaker off and check that the LED on the MS5902-T in the outlet is
    off to confirm you have found the correct breaker or buse.
Test Socket   Keep the pillar at right on the MS5902-T.
 Please contradistinguish nameplate on the MS5902-T.
  Keep clean with a dry cloth.
When the yellow LED is light on the MS5902-R, please unscrew and 
    remove cover, insert new 9V battery so as to the MS5902-R is well-balanced.
Applicable decorate wallboard in the home or bureau.
Wooden pillar and metal stud detection.
Metal pipe detection.
AC voltage detection.
LCD dynamic indication and vocality indication.
Fully automatic operation.
Warning for low battery.
Operation environment: 0~50°C 50%RH
Meters list: 1 unit of the below:
MS2008A: valued as  $35.00
MS8233B::valued as  $30.00
MS5902: valued as  $35.00
MS6906: valued as  $35.00
Other tools:
Screwdriver  4 ( retail value: $19) 
Flashlight: 1  ( retail value: $12)
Adjustable Wrench : 1  ( retail value: $15) 
Knife : 1 ( retail value: $2) 
Needle-nose pliers: 1 ( retail value: $8) 
Diagonal pliers: 1 (retail value: $8) 
Pliers:  1 (retail value: $6) 
3M length tape:1 ( retail value: $3) 
Portable bag: 1   ( retail value: $38)
Total retail value is around $254.00
Shipping: ALL orders will ship from our China warehouse by air mail with track #
6-12 business days, if you need it fast you can add $15-$25 for express mail 
shipping, thank you