Wifi Thermostat Electric Heating Thermostat With Touchscreen Smart Programmable Temperature Controller With LCD Display 16A

Wifi Thermostat Electric Heating Thermostat With Touchscreen Smart Programmable Temperature Controller With LCD Display 16A
  • Продавецwww.jacksonvillejaguarsvsindianapoliscolts.us
  • Список ценUS $32.33piece
  • Продажная ценаUS $32.33piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,8 (488)

Oписание продукта

 

Color Touch Screen Water Heating and Boiler Wifi Thermostat  

 

 

 

Main Display

1,WiFi indicator- Displayed when connected to a WiFi Network

2,Hold:Temperature Hold.

3,Adjusting the optional settings.

4,Day Indicator&Clock

5,Away:Means the MC6-HW is maintaining a lower temperature to give frost protection.

6,OPT(Optimum):Displayyed ON/OFF of the “Optimum Start”

7,Air Humidity:

1)If humidity value less than 30%,the pointer will be in the Red area.

2)If humidity value is between 30% and 60%,the pointer will be in the Green area.

3)If humidity value is more than 60%,the pointer will be  in the Gray area.

8,Power ON/OFF

9,Holiday:Displayed when thermostat is in holiday mode.

10,Schedule:Programmable Operation.

11,Setup Button

12,13 Adjusting the Setting Temperature or Turn Page.

14,Setting Temperature display

15,Room Temperature display

16,℃ or ℉ Display

17,Displayed “ Heating” symbol

 

 Fearture Settings

 Clock Setting 
To set the clock,follow these steps.
★Click the icon   and enter Feature Settings.
★Click The “Clock Setting”enter Setting Interface
★Click the column of Year/Month/Day,use the icon  to set the Year/Month/Day values.
★Click the column of “Time”,use the icon   to set Hours/ Minute.
★Click the icon  to save and return to main display.
 Backlight Setting 
★Click the icon   and enter Feature Settings.
★Click“Backlight”Seclection and enter Backlight Setting.
★Ambient Light Dimming is in  Mode:Automatically adjust the backlight brightness.
★Ambient Light Dimming is in  Mode:Manually adjust the backlight brightness.
★Use the icon   to adjust to the desired brightness
★Click the icon   to save and return to main display.
 Standby Screen 
★Click the icon   and enter Feature Settings.
★Click “Standby Screen”and enter Setting interface.
★There are Four Selection(3Min,10Min,Just Night,Never) to controls the Standby Screen Time.
★For example, setting the standby time is for 10 minutes
Click the icon   in the front of “10 Min” and it will turn to  .
★Click the icon  to save and return to main display.
 Screen Lock 
★Touch (Click on )the icon   and enter Feature Settings.
★Click “Screen Lock”and enter setting interface.
 Lock Pin  Options
★For example, Setting the Lock Pin is 5209
 ※Click the First Column ,use the icon    to set to 5
 ※Click the Second Column , use the icon   to set to 2
 ※Click the Third Column ,use the icon   to set to 0
 ※Click the Fouth Column ,use the   to set to 9
★Click the icon   to save and return to main screen.
Note:To unlock the MC6-HW press .The display will show and you will need to enter the four digit pin number you set previously.
 
 
 
 Temperature Format
★Click the icon   and enter Feature Settings.
★Find the “Temp Format” option,click it and enter setting interface.
★There are two Options   /  
★Click the icon   in the front of   or  ,and it will turn to  .
★Click the icon twice to save and return to main screen.
 Temperature Limit
★Click the icon   and enter Feature Settings.
★Find the “Temp Limit ” option,click it and enter setting interface.
★Click the First Column,use the icon   to adjust Minimum Temperature to 5-34℃
★Click the Second Column ,use the icon   to adjust Maximum Temperature to 6-35℃
★Click the icon   twice to save and return to main screen.
 Defrost
The thermostat automatically enter the Defrost Mode when the room temperature is drop below the defrost temperature.
★Click the icon   and enter Feature Settings.
★Find the“Defrost” option,Click it and enter setting interface.
Temperature    Options.
★Use the icon   to adjust the temperature.
★Click the icon   twice to save and return to main screen
 Sensor Selection
There are five options:
Built in Sensor(Default)
Remote Air Sensor
Floor Sensor Only
Built in &Floor Sensor
Remote Air &Floor Sensor
★Click the icon  and enter Feature Settings.
★Find the “Sensor Selection” option,Click it and entry in setting interface.
★Click the icon   of which sensor you required.
★Click the icon   twice to save and return to main screen.
 Floor Temperature Limit
★Click the icon   and enter Feature Settings.
★Find the “Floor Temp Limit” option,Click it and entry in setting interface.
★Use the icon   keys to set the temperature.
★Click the icon   twice to save and return to main display.
 Daylight Saving Time
★Click the icon   and enter Feature Settings.
★Click “DST”and enter setting interface.
Auto DST    Options
★There are three options:
 European Union/US&Canada/Australia&New Zealand
★Click the icon   in the front of “EU/U&C/A&Z” and it will turn to  .
★Click the   Keys to save and return to main screen.
 System Information
★Click the icon   and enter Feature Settings.
★Click “System Information”and enter interface,and it shows
Version Number:2.0
★Click the   Keys to Exit
 
 
 Reset To Factory Settings
★Click the icon   and enter Feature Settings.
★Click “ ”and enter setting interface.
★Click “Reset” to factory settings
★Click the   Keys to Exit.
Warning:Reset will make you lost the current Settings and return to the factory Settings.
 Installation 
Install the thermostat at the visual level.
Please read the instructions in order to better understand our products.
Do not install in areas close to the heat source, which will affect its function.
This MC6-HW thermostat is designed to be flush mounted and requires a 35mm power box in the wall.
Step 1
Using a flat-blade screwdriver, loosen the screws from the bottom face of the front of the thermostat, and then separate the front half from the backplate.
Step 2
First place the front panel of the thermostat in a safe place.
And then follow the wiring diagram on page *** of  manual for connecting terminals.
Step 3
Screw the thermostat backplate into the mounting box in the wall.
Step 4
The thermostat front panel in the thermostat backplane fastening, and then lock the screws.
Fasten the front of the thermostat onto the backplate,securing it in place with the retaining screw.
 
◆Technical Specification
Power supply :110-230VAC,50/60 Hz 
Setting temp range:5-35℃              
Working temp range: -10-45℃
Temp accuracy:±1℃
Power consumption:1W
Floor Temperature Limit:20-45℃
Max Switch Current:3A/5A(Optional)
LCD screen size:3.5 Inch
Touch:Capacitive Screen
Hole Pitch:60mm
Grade of protection:IP 40
Sensor type :NTC10k
Installation type:Europe Flush
Dimention: 96mm * 86 mm* 42.5mm(including power supply unit high 29.5mm)
Wifi:802.11 b/g/n (2.4G)
 
 
 
Wiring Diagram  
 
MC6 -HW